Wheelchair Van Dimensions Guide

for Side-Entry Vans

Side-Entry Wheelchair Van Dimensions Guide

How to Read the Charts

Each lettered column (A–N) corresponds to a measurement shown on the diagram. Hover any column header to see its full name. Dimensions in inches unless noted; ramp angle in degrees; ramp capacity in pounds.

ADoor Opening Usable Width
BDoor Opening Usable Height (Middle of Door)
CInterior Height at Center of Vehicle
DInterior Height at Driver/Passenger Position¹
ERamp Length
FRamp Width (Usable Clear Opening)
GRamp Angle (Vehicle Kneeled)²
HInterior Floor Length (Behind Front Seat Strikers)
IOverall Interior Floor Length (Flat Area)
JInterior Width at Slide Doors (Door Closed)
KInterior Width at B Pillars
LGround Clearance at Lowest Point (Unloaded)
MOverall Vehicle Height
NRamp Capacity
Side-entry wheelchair accessible van diagram showing measurement reference points A through N
Side-entry reference diagram — letters correspond to the measurement columns in the charts below.

¹ Interior height at the driver/passenger position is measured with the original seating removed.

² Ramp angle is measured with the vehicle in its kneeled position. A lower angle means a more gradual incline.

— indicates a measurement that is not published or not applicable for that configuration.

Dimensions are manufacturer reference figures and may vary by model year, options, and production changes. Always confirm exact measurements before purchase. This guide covers side-entry conversions only.